Feeney 6200 Series 6235-PKG Standard Stainless Steel Cable Assembly for Metal Frames

-10%

$60.35

$67.05

Brand: Feeney®
Availability: In Stock

Feeney 6200 Series 6235-PKG Standard Stainless Steel Cable Assembly for Metal Frames6235_Standard Assembly_MetalCableRail, Standard Assemblies, 1/8" Assemblies for Metal Posts1/8" Standard Assembly for Metal Posts 35'Our most popular and cost effective cable option, perfect for all residential and light commercial projects. Each assembly includes the selected length of 1/8" diameter...

$60.35

$67.05

Feeney 6200 Series 6235-PKG Standard Stainless Steel Cable Assembly for Metal Frames


6235_Standard Assembly_Metal
CableRail, Standard Assemblies, 1/8" Assemblies for Metal Posts

1/8" Standard Assembly for Metal Posts 35'

Our most popular and cost effective cable option, perfect for all residential and light commercial projects.

Each assembly includes the selected length of 1/8" diameter type 316 stainless steel cable with one pre-attached Threaded Terminal fitting, one QuickConnect® SS fitting, two Nylon Flat Washers, one stainless steel Snug-Grip washer nut


Usually Ships in 1 to 2 Business Days
Features:

Made from high-strength, low-maintenance, weather-tough, 316-grade stainless steel

Available in 1/8", 3/16", and 1/4" diameter cable to complement any railing design

Sold in a wide range of standard lengths (5 ft to 70 ft in 5-ft increments) that can be trimmed to a finished dimension in the field
Patented automatic-locking Quick-Connect®SS fittings make installation fast and easy

May be installed on new or existing metal railing frames in exterior, interior, residential, and commercial settings

Complete installation instructions, frame requirements, 3-part specifications, and detail drawings available

Product contains recycled materials

To minimize cable deflection, each cable, when properly installed, will have a tension load of at least 300 lbs. Therefore, it's important that frames are designed and built strong enough to support these loads. Review Frame Requirement Detail to help you prepare the railing for cable infill.

We strongly advise against exceeding a 3-inch cable spacing.

We recommend having a post or vertical member (intermediate picket) at least every 3 feet.

Standard Cable Assembly don't require specialcrimpers or tensioning tools. The basic tool list would include: Electric drill and bits, ViseGrip® pliers, 7/16" wrench for tightening washer nuts and a cut-off disk for trimming ends.

Give us a call if you need assistance, 707-224-9100



Product Specifications

Type 4-1/4" Terminal (Metal Post)
Length 35 ft
Diameter
1/8"
Package Size Each
Material Type 316 grade stainless steel
Included Accessories (1)selected length of 1/8" cable with pre-attached ThreadedTerminal fitting, (1) Quick-Connect® SS fitting, (2) Nylon Washers and (1) stainless steel Snug-Grip® washer nut
Warranty CableRail 10 Year_ Limited Warranty

Made from high-strength, low-maintenance, weather-tough, 316-grade stainless steel

Available in 1/8", 3/16", and 1/4" diameter cable to complement any railing design

Sold in a wide range of standard lengths (5 ft to 70 ft in 5-ft increments) that can be trimmed to a finished dimension in the field
Patented automatic-locking Quick-Connect®SS fittings make installation fast and easy

May be installed on new or existing metal railing frames in exterior, interior, residential, and commercial settings

Complete installation instructions, frame requirements, 3-part specifications, and detail drawings available

Product contains recycled materials


Important Notes:
Carefully plan the location of all end and corner posts to allow for proper clearance from walls and to maximize cable run lengths.
To ensure proper tensioning, straight runs of cable (no turns, dips or rises) should not exceed an 70 ft assembly.
Cable runs that do have corner bends or dips should not exceed a 40 ft assembly and should not have more than 2 corners or bends per run.
End and corner posts (the cable load bearing posts) must be of the recommended minimum sizes noted in the frame requirements & details pages.
All posts/verticals should be spaced a maximum of 3 feet apart.
Cables should be spaced a maximum of 3 inches apart.
All posts must be securely fastened to the cap rails and to the deck joists/structure.

Add text, HTML, images, and videos to this tab via product settings

Recently Viewed Products