Individual Components

Tools, Rods, Parts, Washers, and more

Manufactured from type 316 stainless steel and come in a satin finish

Attractive and Economical
Meets Strength and Versatility

Feeney® stainless steel rods can be used in a variety of applications, including glass curtain walls, door canopy supports, guardrail balusters, and trellis infill grids. Rod assemblies support loads in both tension and compression conditions.

STAINLESS STEEL ROD

Custom cut and threaded to meet specific requirements of each job. Milled
wrench flats allow tools to grip the rod securely with minimal scratching.

316 STAINLESS STEEL

Made from type 316 stainless steel and comes in a satin finish. Minimum breaking loads are based on the core diameter of the thread.

UNF THREADS

Available in diameters to suit UNF threads 5/16″ to 1″ in size and lengths up to 12-feet using a single rod. Length can be extended using a rod connector.

Rod Diameter	Part
5/16″	#1390
3/8″	#1385
1/2″	#1391
5/8″	#1387
3/4″	#1382
1″	#1393

TENSION FORK

Each fork comes with a locking Conical Nut (CN) and Double Headed Pin. Using LH and RH threaded Tension Forks on a rod assembly alleviates the need for a turnbuckle and provides the most symmetrical design and economical method of tensioning.

316 STAINLESS STEEL

Made from type 316 stainless steel and comes in a satin finish. Designed to support the full load of the rods.

UNF THREADS

Available with left and righthand UNF threads 5/16″ to 1″ in size.

Rod Diameter	R/L	Part
5/16″	Right Hand	#1305
3/8″	Right Hand	#1310
1/2″	Right Hand	#1315
5/8″	Right Hand	#1320
3/4″	Right Hand	#1325
1″	Right Hand	#1330
5/16″	Left Hand	#1306
3/8″	Left Hand	#1311
1/2″	Left Hand	#1316
5/8″	Left Hand	#1321
3/4″	Left Hand	#1326
1″	Left Hand	#1331

ROD CONNECTOR

Used to link two rod sections together to extend lengths beyond 12 feet. Connectors are tapped left-hand (LH) threads on one end and right-hand (RH) threads on the other to ensure that assemblies will not unscrew during tensioning.

316 STAINLESS STEEL

Made from type 316 stainless steel and comes in a satin finish. Rod connectors are designed to support the full load of the rods.

UNF THREADS

Available to suit UNF threads 5/16″ to 1″ in sizes.

Rod Diameter	Part
5/16″	#1338
3/8″	#1340
1/2″	#1342
5/8″	#1344
3/4″	#1346
1″	#1348

ISOLATION WASHER

Used to eliminate direct contact of dissimilar metals, thereby minimizing the possibility of electrolysis when attaching Tension Forks to structural members.

Nylon

STRENGTH AND DURABILITY

Made from nylon for extra high compression strength and durability. Washers are non-stock items and are only available by special order.

Rod Diameter	Part
5/16″	#3155
3/8″	#3401
1/2″	#3402
5/8″	#3403
3/4″	#3404
1″	#3405

ISLOATION SLEEVE

Used to eliminate direct contact of dissimilar metals, thereby minimizing the possibility of electrolysis when attaching Tension Forks to structural members.

Glass

STRENGTH AND DURABILITY

Made from glass-filled nylon for extra high compression strength and durability. Isolation Sleeves are non-stock items and are only available by special order.