Fixed Button Head 1/8" M 3287

-10%

$7.88

$8.75

Brand: Feeney®
Availability: In Stock

Fixed Button Head 1/8" (M) (ID: 3287)CableRail, Custom Assemblies, Custom Fittings, Machine Swaged, 1/8" FittingsFixed Button HeadSingle piece fitting with non-removeable, low profile rounded head. Fits into a hole drilled through the end post, and the head rests against the outside face of the post. Use beveled washers (#3791), sold...

$7.88

$8.75

Fixed Button Head 1/8" (M) (ID: 3287)

CableRail, Custom Assemblies, Custom Fittings, Machine Swaged, 1/8" Fittings

Fixed Button Head
Single piece fitting with non-removeable, low profile rounded head. Fits into a hole drilled through the end post, and the head rests against the outside face of the post. Use beveled washers (#3791), sold separately) for angled stair terminations and flat washers (see accessories) for added bearing surface on wood posts.

Typically paired with another Fixed Button Head plus an In-line Turnbuckle.


Made from high-strength, low-maintenance, weather-tough, 316-grade stainless steel

Available in 1/8" and 3/16" diameter cable to complement any railing design

May be installed on new or existing wood or metal railing frames in exterior, interior, residential, and commercial settings

Complete installation instructions, frame requirements, 3-part specifications, and detail drawings available

Product contains recycled materials


Made from high-strength, low-maintenance, weather-tough, 316-grade stainless steel

Available in 1/8" and 3/16" diameter cable to complement any railing design

May be installed on new or existing wood or metal railing frames in exterior, interior, residential, and commercial settings

Complete installation instructions, frame requirements, 3-part specifications, and detail drawings available

Product contains recycled materials


Fixed Ball End
Part# Swage Cable C CT L *Drill
3287 M 1/8" 7/16" 1/8" 1" 9/32"
3240 M 3/16" 1/2" 3/16" 1-1/8" 3/8"

M=Machine Swage


Drill is the recommended drill hole size for attaching fittings to end posts. Drill hole diameters for the intermediate posts may be different than the fitting attachment posts; please call our sales department at 707-731-2581 to confirm proper hole sizes.

To minimize cable deflection, each cable, when properly installed, will have a tension load of at least 300 lbs. Therefore, it's important that frames are designed and built strong enough to support these loads. Review Frame Requirement Detail to help you prepare the railing for cable infill.

We strongly advise against exceeding a 3-inch cable spacing.

We recommend having a post or vertical member (intermediate picket) at least every 3 feet.

Give us a call if you need assistance, 707-731-2581.


Everyday Low Price!

Add text, HTML, images, and videos to this tab via product settings

Recently Viewed Products